Multiple flow measurement technologies to measure liquids, gases, steam and corrosive fluids.
| Flowmeter | Service | Wetted Material | Accuracy | Ranges | Temperature Limit | Power Requirement |
|---|---|---|---|---|---|---|
| Coriolis Mass Flowmeter | Liquids and Gas | 304 SS, 316 SS or Hastealloy C | 0.1% or 0.2% or 0.5% | For mass flow rates please refer the catalog | Direct Mount: -58°F to 257°F (-50°C to 125°C) Remote Mount: -58°F to 392°F (-50°C to 200°C) | 18 to 28 VDC or 85 to 220 VAC |
| Ultrasonic Clamp-On Flowmeter | Compatible Liquids | Sensor: Aluminum alloy or Plastic alloy | 1% | 1200A-S2: ½" to 4", 1200A-M2: 2" to 28", 1200A-HS: ½" to 4", 1200A-HM: 2" to 28" | 32°F to 320°F (0°C to 160°C) | 1200A-100F1: 85 to 264 VAC or 24 VDC, 1200A-100M: 8 to 36 VDC 1200A-100H: 90 to 230 VAC or Ni-MH battery |
| Vortex Flowmeter | Liquids, Gas, and Steam | 304 SS and 316 SS | ±1% of reading | Gas: 197 ft/s (60 m/s) Liquid: 23 ft/s (7 m/s) Steam: 230 ft/s (70 m/s) | Standard: 302°F (150°C) Medium: 482°F (250°C) High: 662°F (350°C) | 13.5 to 42 VDC |
| Electromagnetic Flowmeter | Compatible conductive liquids | Electrode Material: 316 SS or Hastealloy C Liner Materials: PTFE or Hard Rubber | ±0.5% of F. S. | For flow range please refer the catalog | Sensor (Remote Mount): -50°F to 158°F (-45°C to 70°C) Converter: -40°F to 122°F (-40°C to 50°C) Direct Mount: 40°F to 122°F (-40°C to 50°C) | 18 to 28 VDC or 85 to 220 VAC |
| Thermal Mass Flowmeter | Air and Nitrogen | 316 SS | ±0.5% of FS | See Velocity ranges in Catalog | -40°F to 302°F (-40°C to 150°C) | 13.5 VDC to 42 VDC |
| Orifice Meters Tek-DP 1610A Tek-DP 1610B Tek-DP 1610C | Liquids and Gas | 304 SS, 316 SS, 316 SS as standard. Monel, PP, PVC, PTFE coated | Standard -20 °F to 100 °F (-28 °C to 37 °C), optional -40 °F to 1200 °F (-40 °C to 648 °C) | |||
| Cone Flowmeter | Liquids and Gas | 304 SS, 316 SS, 316 SS as standard. Hastelloy-C, | ||||
| Flow Nozzle | Liquids and Gas | Carbon steel for weld in type, 304 SS, 304 SS, 316 SS, 316 SS for holding ring type and Ni, Cr, Mo Alloy Steel for flanged type | ||||
| Venturi Meter | Liquids and Gas | All standard materials available | ||||
| Inline Ultrasonic Flowmeter | Crude oils and other liquid hydrocarbons including (potable /cooling) water tariff metering | +/- 0.10% accuracy with a constant K-factor | Process: -20°C to +120°C Ambient: -20°C to +55°C | 110/220 VAC 50/60 Hz or 18/32 VDC, 10W, isolation 1500V | ||
| Wedges | Fluids and Gases | ≤ ± 0.5 % of the actual flow rate (Calibrated) | Standard at -20°F to 100 °F, optional -40 °F to 1200 °F |
