910 Hot / Wet Multi Gas Mass Flow CEMÂ is specifically configured for monitoring the stack emissions of multiple pollutants on a mass rate basis. It is able to measure stack effluent temperature and velocity in addition to as many as five pollutant concentrations at stack conditions. This enables each pollutant’s mass emission rate to be reported. With the addition of an optional zirconium oxide sensor, the 910 is capable of monitoring oxygen.
The 910 is a very robust and reliable analyzer. Its UV-based measurements do not suffer from H2O and CO2 interference. They also have a wide dynamic range for some measurements. This greatly simplifies sample handling and sample integrity as there is no need for sample drying. As a fully extractive, heated wet basis analyzer, the 910s sample system components are simply heated above the dew point of the sample gas. The results are a simpler and more accurate calculation of gas concentrations, requiring no corrections for condensed and dissolved components.
FEATURES
- Hot/wet analysis prevents errors associated with:
- Correcting for water vapor, and Absorption losses in driers
- Able to measure up to five of the following species: SO2, NO, NO2, H2S, NH3 or a number of other chemicals
- Multi-range SO2Â measurement
- No H2O or CO2 interference
- Automated zero and span gas calibration
- Serial interface with plant DCS
- Incorporates flow measurement for emission rate calculations